CES : BGW Millenium Series
 
 

BGW Power Amplifiers


BGW Millennium Series Specifications

Power Output
Per Channel .1% THD, 20Hz - 20kHz continuous


                Stereo Mode      Bridged Mono (.25%THD)   Transformer Outputs (1kHz, 0.1% THD)
               8 Ohms  4 Ohms      16 Ohms  8 Ohms            70/100V    140/200V		
Millennium 1	100     150          200     300               150         300
Millennium 2	200     300          400     600               300         600
Millennium 3	300     450          600     900               450         900


Intermodulation Distortion Less than 0.05% at rated output (SMPTE method, 60Hz & 7kHz, 4:1 ratio)
Frequency Response 20Hz or 40Hz (selectable) to 150kHz +0, -3dB
Transformer Outputs 40Hz - 15kHz, +0, -3dB
DC Offset Voltage Less than 10 millivolts at output terminals
Hum and Noise Level 100dB below rated output into 8 ohms (20Hz to 20kHz unweighted)
Min. Input Impedance (/ch) 10k ohms balanced
Input Sensitivity 0.775 Vrms for rated 8 ohm output
Voltage Gain 31.2dB, 36.3X 34.2dB, 51.3X 36dB, 63.1X
Damping Factor Greater than 200:1 (ref. 8 ohms)
Output Regulation 100V or 70V tap; less than 1.0dB
High Pass Filter 18dB/Oct. Butterworth, internally adjustable, 20 or 40Hz
Power 100, 115, 230 VAC,50-60 Hz 350VA/275W 650VA/480W 865VA/675W
Dimensions Height 3U 5.25 inches (13.3 cm) Width 19 inch standard rack front panel (48.3 cm) Depth (w/autoformers) 12.8", (14.6") 12.8", (14.6") 15.4", (19.2")
Weight Net/Shipping 28/32 lbs 34/38 lbs 40/44 lbs

Due to continuous product improvements, all specifications and features are subject to change without notice.

 


Amp Index Page

Thanks to BGW
We would like to thank BGW for allowing us to place this information on our website. Any reproduction of information from this page must go through BGW for permission.