| DFP-3000 General Specification |
| Power requirement |
100 ~ 240V AC 50Hz/60Hz |
| |
|
| Power consumption |
1.1A |
| |
|
| Operating temperature |
5°C ~ 40°C (41° F ~ 104° F) |
| |
|
| Operating humidity |
10% ~ 90% |
| |
|
| Storage temperature |
--20°C ~ +60°C (-4° F ~ +140° F) |
| |
|
| Dimension |
482 x 147 x 375 (mm) |
| |
|
| Weight |
11kg |
| |
|
| EIA rack mount space |
3 units |
| |
|
| Sampling frequency |
44.1 kHz |
| |
|
| Lock_in time |
1 sec max. |
| |
|
| Sync_drift rate |
10Hz/sec max. |
| |
|
| Sync_drift |
20 msec max. |
| |
|
| Main Features |
| |
|
| HPF |
Cut off: 47/68/100/150/180/220Hz |
| |
Slope -12dB/oct |
| |
|
| Subwoofer LPF |
Cut off: 80/100/125/160/200/250/330Hz |
| |
Slope -12dB/oct |
| |
|
| 28 band Graphic EQ |
|
| |
|
| 2 band SW parametric EQ |
Q: 0.5/3/6 |
| |
Boost: +/-10dB (0.5dB steps) |
| |
|
| Surround ch delay |
0-99ms |
| |
|
| Slit loss adjustment |
|
| |
|
| 16 mode SP matrix |
|
| |
|
| Test generator |
1kHz,10kHz, pink noise |
| |
|
| 8 mode Preset |
|
| |
|
| Theater mic routing switcher |
|
| |
|
| Fader automation |
|
| |
|
| |
|
| Audio Characteristics |
| Frequency response |
20Hz ~ 20kHz (+/-1dB) |
| |
|
| Distortion |
Less than 0.07% (at 1kHz nominal level) |
| |
|
| Dynamic range |
More than 90dB |
| |
|
| Cross talk |
Less than -80dB (at 1kHz) |
| |
|
| Service Tools & Accessories |
| |
|
| DFP-3000 Series Service Manual |
| |
|
| *SDDS Alignment Film |
| *Installation Test Film Kit |
| Operation Guide (1) for DFP-R3000 |
| Reader Cable (1) |
|
|
| |
|
| Reader Mount Kit (1) |
| |
|
| *Optional Reader Mount Adapters |
| |
|
| Operation Manual (1) for DFP-D3000 |
| |
|
| Power Cord |
| |
|
| AC Adapter (for Backup Power) |
| |
|
| |
|
|
| I/O Characteristics |
| PROJECTOR I/O |
|
| |
|
| Reader 1/2 connectors |
5W1 connector (2) |
| |
|
| Optical 1/2 connectors |
D-sub 9 pin female (2) |
| INPUT |
|
| MIC INPUT connector |
D-sub 9 pin female |
| |
Reference level Mic: -50dBu (-60 ~ -20 dBu/1dB step) |
| |
|
| (MIC 1 selectable to line input) |
Reference level Line: -10dBu (-16/-10/+4dBu selectable) ) |
| |
Impedance 1.2k½ min. (Line: 10k½) |
| NON-SYNC connector |
RCA stereo phono jack |
| |
Impedance 10k½ min. |
| |
Reference level -10dBu |
| AUX INPUT 1/2 connectors |
L, LC, C, RC, R, SW, SL, SR |
| |
D-sub 25 pin female |
| |
Reference level -8.2dBu |
| |
Impedance 10k½ min. |
| |
|
| OUTPUT |
|
| SYSTEM OUTPUT connector |
D-sub 25 pin L, LC, C, RC, R, SW, SL, SR |
| MONITOR OUTPUT connector |
D-sub 25 pin male |
| |
Load Impedance 600½ min |
| |
Reference level: -20dBfs |
| |
(+4/-10/-16dBu selectable) |
| |
(+24dBu max at 10k½ balanced) |
| Hearing impaired |
D-sub 9 pin female |
| |
Sum of 7 channels (excluding SW) |
| |
Load Impedance 600½ min. |
| |
Reference level -10dBu |
| HEADPHONES jack |
Output level 100mW (at 32½) |
| |
|
| CONTROL I/O |
|
| REMOTE LEVEL CONTROL |
D-sub 9 pin female connector |
| |
Input voltage 0 ~ +10V |
| Automation I/O |
D-sub 37 pin female |
| RS-232C |
D-sub 9 pin female |
| |
Baud rate 19.2kbps |
| RS-422 |
D-sub 9 pin female |
| |
|
| Backup Power |
|
| DC INPUT |
Input voltage 15V DC @ 1A |
| |
Transmission rate 19.2kbps |
| RS-422 |
DSUB 9 pin_female |
| |
|
| Backup Power |
|
| |
|
| |
|
| |
|
| THX® Approved |
|
|
